DEKALSEM is used for the removal of lime and cement, sand, nature, brick, granite and all acid-resistant stones. Barrel of 200 liters.
Dalsem is used for removing lime and cement-calcareous sand, nature, slate and brick, granite and other acid-resistant stone.
Is also used for removing lime and cement residues from concrete mixers, cement forms,, line pipes, scaffolding pipes, metal and wooden formwork,...
Particularly recommended for cleaning trucks carrying cement or lime.
DEKALSEM is self-acting and cleans very quickly. It consists of a combination of mineral acids enriched with corrosion inhibitors for the protection of the surfaces to be treated.
Is also equipped with a tensio-active (= detergent).
Depending on the nature and degree of pollution and of the absorbance of the substrate, apply up to a maximum of 1 DEKALSEM extended to 10 parts of water.
Apply with of a brush or a low-pressure spray.
After a reaction time of 5 to 10 min, rinse with water
A mixture of non-toxic mineral acids, non-ionic tensio-active biodegradable substances, complexing agents and corrosion inhibitors.
Appearance: clear liquid Active ingredients: 32.1%
Color: red-orange Odour: pungent
Viscosity / 20 ° C: 8mPa.s Shelf life: unlimited at room temperature in closed containers
Density / 20 ° C: 1.140 Stability: keep frost
PH value: 0,5 Packing: 30 l
R 34 Causes burns
R 37 Irritating to respiratory system
S 2 Keep out of reach of children
S 26 In case of contact with eyes, rinse thoroughly with water and consult a specialist